The rise in air pollution levels due to urbanisation and industrial activities has become a major concern for cities and communities worldwide. To address this issue, air quality monitoring systems play a crucial role in ensuring safe and healthy living conditions. These systems provide real-time data on various ambient air pollution parameters, enabling stakeholders to take corrective actions and meet regulatory standards. In industries, continuous air quality monitoring helps detect anomalies and potential risks to the health of workers, while in academic settings, compact monitoring systems make air quality research accessible and affordable. With the ability to measure particulate matter, gases, and noise levels, air quality monitoring systems help improve the health and safety of citizens in urban areas and provide valuable insights for research purposes.
Air quality monitoring refers to the measurement and analysis of the various pollutants present in the air. These pollutants can include particulate matter, gases, and noise, among others. The main purpose of air quality monitoring is to determine the level of air pollution and to assess its impact on human health and the environment. This information is used by governments, industries, and other stakeholders to develop policies and strategies to mitigate the negative effects of air pollution. Air quality monitoring can be performed by a variety of methods, including stationary monitoring systems, mobile monitoring systems, and personal monitors. The type of air quality monitoring used will depend on the specific needs of the individual or organisation and the type of air pollution being measured.
Air quality monitoring is the process of measuring various parameters that make up the air quality, such as particulate matter, gases and noise. There are various methods and technologies that can be used to monitor air quality, including:
The choice of air quality monitoring method depends on the specific needs and requirements of the monitoring project, such as the type of air quality parameters to be measured, the location of the monitoring, and the budget available.
Air quality monitors are devices designed to measure and monitor the levels of various pollutants in the air. They can measure a range of parameters including particulate matter (PM), gases (such as carbon monoxide, nitrogen oxides, and sulfur dioxide), and other air pollutants. These monitors come in different forms, including handheld monitors for personal use, stationary monitors for indoor or outdoor use, and integrated air quality monitoring systems for industrial and commercial applications. The data collected by air quality monitors can provide insight into the levels of air pollution in a specific area, which can help inform decision-making and policy development aimed at reducing air pollution.
An indoor air quality (IAQ) monitor is a device that measures the various pollutants present in the air inside a building, such as homes, offices, schools, or commercial spaces. These pollutants can include particulate matter, volatile organic compounds (VOCs), carbon monoxide (CO), carbon dioxide (CO2), and other chemicals or gases that can affect human health and well-being. IAQ monitors typically use sensors to measure the concentration of these pollutants in the air and display the results on a screen or provide real-time data via an app or cloud-based platform. Some IAQ monitors also have the ability to provide alerts or alarms if levels of certain pollutants exceed recommended thresholds, allowing the user to take action to improve indoor air quality.
Determining the best air quality monitor depends on several factors such as the specific pollutants you are interested in monitoring, the environment in which the monitor will be used, and the level of accuracy required. Some air quality monitors may be better suited for indoor use while others may be better for outdoor use. Other factors to consider include the type of sensors included in the monitor, the cost of the monitor, and the ease of use of the monitor. Ultimately, the best air quality monitor for you will depend on your specific needs and requirements. It is recommended to do research and compare different air quality monitors before making a purchase to ensure that you choose the one that best fits your needs.
Oizom Instruments is a leading provider of smart air quality monitoring solutions. Using Oizom’s sensor-based hardware, they offer data-driven environmental solutions to improve decision-making and enhance air quality. With a strong presence in 50+ countries, their solutions have been live at 1000+ locations, positively impacting the lives of over 23 million people. Trust Oizom to effectively monitor your city’s air quality and take the first step towards a better environment.
Polludrone is a cutting-edge air quality monitoring system that offers real-time data for all critical environmental parameters, including air quality, noise, odor, weather, and radiation. With advanced accuracy and cost-effectiveness, the Polludrone is ideal for smart infrastructure projects such as smart cities, airports, schools, highways, and more. The device measures PM1, PM2.5, CO, CO2, SO2, NO2, O3, H2S, ambient noise, light, UV, temperature, and humidity using patented e-breathing technology. The Polludrone is compatible with multiple communication protocols and works seamlessly with the Oizom IoT Terminal for real-time data visualization and analysis. Get accurate air quality data with the Polludrone and make data-driven decisions for a healthier future.
AQBot is a compact and versatile industrial air quality monitor designed to provide real-time data and automate process control. The AQBot series offers a wide range of parameters including Total Volatile Organic Compounds (TVOC), Ammonia (NH3), Hydrogen sulfide (H2S), Methane (CH4), Carbon Monoxide (CO), Formaldehyde (CH2O), Particulate Matter (PM1, PM2.5, PM10, PM100), Ambient Noise, and more. It features a built-in relay for automating external equipment and advanced software with over 10 different modules for data analysis, integration, and reporting. AQBot also has a built-in display and supports industry-standard output signals such as Modbus, Canbus, RS-485, and RS-232 for easy integration into existing building monitoring or plant control systems. With real-time data transfer, alerts and notifications, and siren and strobe light options, AQBot is the ideal solution for industrial air quality monitoring.
The Weathercom Automatic Weather Station is a compact and durable solution for comprehensive meteorological monitoring. It measures various parameters such as wind speed and direction, rainfall, temperature, humidity, pressure, and more. With a light-weight design and easy installation, Weathercom can be powered by solar energy and operate independently. The device offers a wide range of connectivity options and can be remotely operated, making it ideal for use in remote locations. With its weatherproof IP65 grade enclosure and real-time data transfer capabilities, Weathercom provides reliable and accurate weather monitoring data for informed decision-making. Additionally, it can be easily upgraded over the air, ensuring that you always have the latest features and technology at your fingertips.
Thermo Fisher Scientific is a leading global provider of scientific equipment, reagents, and services. With a focus on enabling customers to make the world healthier, cleaner, and safer, the company strives to stay ahead of the scientific curve and anticipate customer needs. By constantly pushing the boundaries of science and technology, Thermo Fisher empowers its customers to be bolder and more innovative in their work. With a commitment to advancing science, the company has a proven track record of delivering high-quality products and services to customers across a wide range of industries and applications.
The Ozone Monitor is a high-performance air quality monitoring device that measures ozone levels using advanced UV photometry technology. This monitor is approved by the US EPA and is designed for use in environmental monitoring stations. With a measuring range of 0-200 ppm or 0-400 mg/m3, a limit of detection of 0.50 ppb, and a response time of 20 seconds, this ozone monitor provides accurate and fast results. It features an internal pump with a volumetric flow of 1-3 LPM, and various connectivity options including RS-232, RS-485, USB, and Ethernet ports. The monitor operates with a touch screen display and has a temperature range of 5-45°C. It is designed for easy operation and runs on 100-240 VAC 50/60 Hz current.
The Sulfur Dioxide Monitor is a highly advanced device that uses UV fluorescence technology to measure sulfur dioxide levels in the air. The monitor features a measuring range of 0-10 ppm or 0-25 mg/m3 with an extended range of 0-100 ppm. Its detection limit is 0.23 ppb, depending on the averaging time and zero drift, with a response time of 60 seconds. The monitor is equipped with an internal pump with a volumetric flow of 0.5 LPM, making it ideal for use in environmental monitoring stations. The device has 4 voltage inputs (0-10 V), 6 analog voltage outputs with 4 selectable ranges, 6 analog current outputs with 2 selectable ranges, 16 digital inputs (TTL), 10 digital relay contact outputs, and 8 controller output solenoids. The monitor also has RS 232 and RS 485 ports, 3 high-speed USB ports, and an Ethernet port, making it easy to connect to other devices. The easy-to-use touchscreen interface makes the monitor user-friendly, while the operating temperature of 0-45 °C makes it suitable for use in a variety of environments. The monitor operates using 100-240 VAC 50/60 Hz current.
The Carbon Dioxide Monitor from this company is an ideal solution for measuring air quality in various environmental monitoring stations. It uses non-dispersive infrared (NDIR) technology to measure the concentration of carbon dioxide in the air, with a measuring range of 0-10,000 ppm and a limit of detection of 1 ppm. The monitor has a response time of 90 seconds, depending on the average time, and features an internal pump with a volumetric flow of 1 LPM. It also has 4 voltage inputs, 6 analog voltage outputs with 4 selectable ranges, 6 analog current outputs with 2 selectable ranges, 16 digital inputs, 10 digital relay contact outputs, and 8 controller output solenoids. The monitor is easy to operate with its touchscreen interface and has various communication options, including RS 232 port, RS 485 port, 3 high-speed USB ports, and an Ethernet port. It is designed to operate in temperatures ranging from 5-45 °C and is powered by 100-240 VAC 50/60 Hz current.
The Thermo Scientific Ammonia Monitor is a highly advanced air quality environmental monitor designed for measuring Ammonia levels. It uses the principle of light measurement emitted by the reaction of Nitrogen Oxides (NO) with Ozone to provide highly accurate readings. The monitor has a configurable measuring range of 0-20 ppm and a limit of detection of 1 ppb with zero drift. It has a response time of 120 seconds and an internal pump with a volumetric flow of 0.6 LPM. The monitor also offers selectable voltage outputs, RS 232 and RS 485 ports, TCP/IP output, 10 status relays, a fault indicator, and an optional 4-20 mA output. With 16 digital inputs and 8 analog inputs, the monitor is highly customizable to meet the specific requirements of different applications. The monitor operates at a temperature of 15-35°C and runs on 100-240 VAC 50/60 Hz current.
Thermo Scientific presents its Nitrogen Oxides Monitor, which uses chemiluminescence technology for measuring NO-NO2-NOx. The monitor has received US EPA approval, making it an ideal choice for air quality and environmental monitoring stations. The monitor has a measuring range of 0-20 ppm to 0-30 mg/m3, with a limit of detection of 0.40 ppb and zero drift of less than 0.40 ppb. The response time of the monitor ranges from 40 to 300 seconds, depending on the average time chosen. The monitor features an internal pump with a volumetric flow of 0.6-0.8 LPM, and 4 voltage inputs, 6 analog voltage outputs with 4 selectable ranges, 6 analog current outputs with 2 selectable ranges, 16 digital inputs (TTL), 10 digital relay contact outputs, and 8 controller output solenoids. The monitor also has RS 232 and RS 485 ports, 3 high-speed USB ports, and an Ethernet port, making it easy to operate with a touch screen. The monitor operates at a temperature range of 5-40°C and requires 100-240 VAC 50/60 Hz current.
The Hydrochloric Acid Monitor is a reliable solution for monitoring the concentration of hydrochloric acid in the air. It uses a highly accurate correlation filter technology to measure the levels of the gas. The monitor has a configurable measuring range of 0-5000 ppm or 0-7500 mg/m3 and a detection limit of 0.20 ppm with zero drift of less than 0.2 ppm. It has a response time of 120 seconds and an internal pump with a volumetric flow of 1 LPM. The monitor features selectable voltage outputs, RS 232/RS 485 port, TCP/IP output, 10 status relays and fault indicator, and a 4-20 mA output (optional). It also has 16 digital inputs and 8 analog inputs 0-10 VDC (optional). The monitor operates at a temperature range of 5-45 °C and is powered by 100-240 VAC 50/60 Hz current. It is an ideal choice for use in environmental monitoring stations for measuring air quality.
The Sulfur Dioxide and Hydrogen Sulfide Monitor uses UV fluorescence technology to measure the levels of these gases in the air. The monitoring system features a configurable measuring range of 0-10 ppm/0-25 mg/m3, with a limit of detection of up to 0.5 ppb. The response time of the monitor can range from 80 seconds, depending on the selected average time. The monitor also features an internal pump with a volumetric flow of 1 LPM, selectable voltage outputs, and communication ports such as RS 232/RS 485, TCP/IP output, and 10 status relays. Additionally, the monitor is equipped with optional 4-20 mA output, 16 digital inputs, and 8 analog inputs. The monitor operates at a temperature range of 20-30°C and can be powered with 100-240 VAC 50/60 Hz current.
Multigas gauge for precise calibration of air quality monitors. The gauge is designed to provide accurate levels of Ozone, Carbon Monoxide, Non-Methane, Sulfur Dioxide, Nitric Oxide Nitrogen dioxide, and other gases. With 6 ports for gas cylinder connection, the gauge features an ozonator with a minimum output of 3 ppb and a response time lower than 180 seconds with zero drift of less than 1 ppb. The photometer has a range of 0-5 ppm with a limit of detection of 1.5 ppb and zero drift. The gauge also has 4 voltage inputs, 6 analog voltage outputs, 6 analog current outputs, 16 digital inputs, 10 digital relay contact outputs, and 8 solenoid controller outputs for easy integration into existing systems. The touch screen interface and various communication ports make the multigas gauge easy to operate, with an operating temperature of 0-45°C and operation with 100-240 VAC 50/60 Hz current.
The Zero Air Generator is a high-precision tool designed for the calibration and verification of environmental monitors. It features two flow options of 0-10 LPM and 0-20 LPM and minimal contamination, ensuring accurate readings. The generator has a concentration of pollutants below 0.1 ppm CO, 0.1 ppm HC, 0.8 ppb O3, 0.5 ppb SO2, 0.5 ppb H2S, 0.5 ppb NH3, 0.5 ppb NO, and 0.5 ppb NO2. It operates at a converter temperature of 325-450°C and a pressure of 10-30 PSI. The generator has an operating temperature range of 0-45°C and operates with 100-240 VAC 50/60 Hz current.
The Carbon Monoxide Monitor from THERMO SCIENTIFIC is an air quality monitoring system designed to accurately measure the concentration of carbon monoxide in the air. It uses correlation filter technology to provide reliable and precise measurements in a range of 0-10,000 ppm. The device has a detection limit of 0.04 ppm with zero drift <0.1 ppm and a response time of 60 seconds. It features an internal pump with a volumetric flow of 1 LPM and has a range of connectivity options, including 4 voltage inputs, 6 analog voltage outputs, 6 analog current outputs, 16 digital inputs, 10 digital relay contact outputs, and 8 controller output solenoids. The monitor is equipped with a touch screen for easy operation and has a wide operating temperature range of 5-45°C, making it suitable for use in a variety of environments. It is also US EPA approved and operates on 100-240 VAC 50/60 Hz current.
The Nitrous Oxide Monitor N2O is an advanced gas monitoring device designed to measure the concentration of Nitrous Oxide in the environment. It is equipped with the latest correlation filter technology which provides accurate and reliable measurements of the gas. The monitor features a configurable measuring range of 0-50 ppm or 0-100 mg/m3 and has a detection limit of 0.02 ppm with zero drift of less than 0.05 ppm. The device has a fast response time of 60 seconds and is equipped with an internal pump with a volumetric flow rate of 0.5-2 LPM. It also has selectable voltage outputs, RS 232/ RS 485 port, TCP/ IP output, 10 status relays and fault indicator, and 4-20 mA output (optional). The monitor is also equipped with 16 digital inputs and 8 analog inputs with a range of 0-10 VDC (optional). The device operates at a temperature range of 5-45°C and is powered by 100-240 VAC 50/60 Hz current.
TSI is a company dedicated to helping customers achieve better air quality through accurate and reliable monitoring solutions. Their commitment to creating a better world by protecting the environment, people, and products is reflected in their mission to provide trusted measurement and data analytics solutions. With a focus on quality and innovation, TSI is at the forefront of air quality monitoring and is a valuable partner in safeguarding what is important. Whether you are looking to make informed decisions or monitor air quality, TSI’s commitment to excellence will give you the confidence you need.
Environmental Monitor DustTrak, a real-time PM10 particulate matter monitor by TSI, uses laser photometer technology to detect and measure air quality. With a range of 0-400 mg/m3, these monitor offers zero stability of +/-0.002 mg/m3. It has a 3 L/min operation flow and can collect samples in a 37 mm filter for chemical analysis. The monitor features USB and Ethernet communication ports, omnidirectional input, and a water trap. It can store more than 60,000 data points with a configurable log interval of 1 second to 1 hour. The monitor is also equipped with a data logger and can be configured and operated via the TrakPro software and Thiamis 3g/GPRS data transmission system. An optional internal battery system can provide up to 48 hours of operation, and an optional solar panel system offers unlimited total autonomy. The monitor is suitable for wall or post mounting and operates on 100-240 VAC 50/60 Hz current.
The DustTrak Environmental Monitor is a high-quality, model-based system designed for real-time monitoring of particulate matter PM 2.5. Using advanced laser sensing photometer technology, it accurately measures the PM 2.5 fraction in the air with a range of 0-400 mg/m3 and a zero stability of +/-0.002 mg/m3. The monitor features a 3 L/min operation flow, sample collection in a 37 mm filter for chemical analysis, USB and Ethernet communication ports, and an omnidirectional input and water trap. With a configurable data logging interval of 1 second to 1 hour, it can store more than 60,000 data points. The monitor is designed for ease of use, with software TrakPro for configuration and operation via PC connection, and a data transmission system through Thiamis 3g/GPRS with WiFi and Bluetooth to the dedicated server Environet. Additional features include a preheated inlet, an internal battery system for up to 48 hours of operation, and a solar panel system for unlimited total autonomy. The monitor is MCERTS certified and can be mounted on a wall or post, and operates on 100-240 VAC 50/60 Hz current.
The DustTrak Environmental Monitor is a real-time particulate material measurement tool. It uses laser photometer detection technology to simultaneously monitor TSP, PM10, PM2.5, and PM1. This monitor is ideal for low-cost real-time monitoring networks, perimeter control networks, and air quality monitoring. It features a range of 0-150 mg/m3 with a zero stability of +/- 0.002 mg/m3 and an operating flow of 3 L/min. The system comes with USB and Ethernet communication ports, an omnidirectional input, and a water trap. The data logger has configurable logging intervals from 1 second to 1 hour for over 60,000 data points. The monitor operates at a temperature of 0-50 °C and relative humidity of 0-100% RH. Optional features include a preheated inlet, an internal battery system for up to 48 hours of autonomy, a solar panel system for unlimited autonomy, a Lufft WS300 or WS500 meteorological system, a solar shield for system protection, MCERTS certification, and a mounting system for both walls and poles. It operates with 100-240 VAC 50/60 Hz current.
CAS is a company that specializes in providing advanced monitoring systems for various industries, including ambient air, industrial fence line, and natural gas pipeline sectors. With a focus on sustainable design and energy efficiency, CAS offers a wide range of products, including process and standalone laboratories, shelters and enclosures, and industrial gas chromatographs for VOC and sulfur analysis. The company is dedicated to providing cutting-edge technology and support to its customers, ensuring accurate and reliable measurement of air quality and natural gas impurities. Whether you need to measure VOCs, mercaptans, or odorization, CAS has the expertise and solutions to meet your needs.
The CAS 9001 Series Shelters are designed for the most challenging environments and applications. With fully customizable features, these shelters are tailored to meet each customer’s specific needs. The temperature stability and deviation of +/- 1.5°C ensure consistent performance, while the use of low VOC emitting materials and non-static forming flooring ensure a safe and healthy environment. The shelters are equipped with non-rusting components, surface-mounted electrical raceway and Square D electrical components for reliable and long-lasting performance. The Bard HVAC Units, speed rail, and multiple options provide flexibility and ease of use. The fully walkable roof decks and integrated meteorological tower, as well as stairs or ladders, provide access to the shelter. The storage area for gas cylinders, racks for instrumentation, and pump cabinets help to reduce heat, noise, and vibration. The antivibration elements are military grade for added stability in the components.
The CAS 9002 Series Mobile Shelters are designed for versatility and affordability. These shelters are fully customizable to fit the specific needs of each customer. They come in multiple platforms including pull-behind trailers, box trucks, Sprinter-style vans, and standard vans. With options for generators, transformers, and shore power, these mobile shelters are equipped to handle any situation. The use of premium products and strict manufacturing practices ensures high quality and durability. The shelters also feature vibration-isolated equipment for travel, storage for gas bottles, and pump boxes to reduce heat, noise, and vibration. Get the solution you need at the price you want with the CAS 9002 Series Mobile Shelters.
The CAS 9003 Series Container Shelters are the ultimate solution for protecting sensitive instrumentation in harsh environments. Made from recycled shipping containers, these shelters offer unbeatable strength, security, and durability. Ideal for near-road monitoring, these containers can be customized to fit your specific needs and come in various colors. With premium materials, strict manufacturing practices, and advanced features such as temperature stability, low VOC emitting materials, non-static flooring, and more, the CAS 9003 Series Container Shelters guarantee to exceed your expectations. The shelters also feature a fully walkable roof deck, integrated meteorological tower, gas cylinder storage, instrumentation racks, pump cabinets, and anti-vibration elements for stability in the racks.
The 9005 Series Dual Buildings are designed to provide a safe and secure environment for sensitive instrumentation. These buildings are split into two isolated areas, one being a Class 1 Division 2 (C1D2) Group C area that is suitable for hazardous environments and the other being a General Classification RTU Room for general purposes. The Dual Buildings are made with premium materials and adhere to strict manufacturing practices, ensuring that they meet and exceed customer expectations. The interior layout can be customized to fit the specific needs of the client and the buildings are equipped with various features such as low VOC emitting materials, non-static flooring, non-rusting components, electrical raceway, HVAC units, and more. The 9005 Series Dual Buildings provide a perfect solution for those who require both a hazardous and non-hazardous area in their monitoring system.
In the United States, the Environmental Protection Agency (EPA) is the government agency responsible for monitoring air quality. The EPA sets national air quality standards, collects and analyzes air quality data, and provides information and resources to help states and local communities monitor and reduce air pollution. Other federal agencies, such as the National Oceanic and Atmospheric Administration (NOAA) and the National Aeronautics and Space Administration (NASA), also play a role in air quality monitoring by conducting research and collecting data on atmospheric conditions. In some states, the state environmental agency may also be responsible for monitoring air quality.
To monitor air quality in industries, there are several options available. The following are some common methods for monitoring air quality:
Regardless of the method used, it is important to choose equipment that is accurate, reliable, and capable of measuring the specific pollutants of concern. The equipment should also be easy to use, maintain, and calibrate to ensure accurate results.
It is also important to consider the regulatory requirements and standards set by local and national agencies when selecting equipment and monitoring methods. By monitoring air quality, industries can identify sources of pollution, monitor emissions levels, and implement measures to reduce air pollution and protect the health and well-being of employees and surrounding communities.
Air quality monitoring in industries is important for several reasons. The benefits of air quality monitoring include:
Tel +1 561-912-9809 / 561-9112-7201
E-mail [email protected]
6590 W Rogers Circle Suite# 11&12
Boca Raton – FL 33487
+1 561-912-9809 / +1 561-912-7201
[email protected]
6590 W Rogers Circle, Suite #11&12
Boca Raton, FL 33487