The Portaccount 8048 monitor allows for the assessment of the effectiveness of half-face and full-face respirators, using a particle counter to determine the adjustment factor between the concentration of particles in the environment and the interior of the respirator. This device provides a quantifiable measurement of the respirator’s seal to a person’s face, ensuring proper protection during usage. The monitor is compatible with NIOSH 100 and 99 series respirators, as well as N95 disposable respirators, and can be used with the FitPro Ultra software on a Windows 10 tablet via Wi-Fi connection. The device features a new user-friendly interface with step-by-step guides, an adjustable factor range from 1 to 10,000 or 1 to 200 for N95 respirators, an internal pump with a flow rate of 350 cm3/min, and a rechargeable isopropyl alcohol cartridge. Operation is powered by AC current.
- Monitor for fit testing for half face and full face respirators by means of particle counter principle by condensation using high purity isopropyl alcohol.
- Use with half facepiece, full facepiece, NIOSH 100 Series, NIOSH 99 Series or any respirator with an efficiency greater than-equal to 99%
- Measurement under OSHA 29 CRF1910 protocol, CSA, HSE and ANSI protocols also available
- Testing using FitPro Ultra software compatible with Windows 10 based Tablet (Requires USB port for initial configuration) via Wi-Fi connection
- New interface with animations and easy-to-use step-by-step explanatory guides for the operator
- Adjustment Factor range from 1 to 10,000
- Accuracy +/- 10% of the Adjustment Factor
- Internal pump with volumetric flow of 350 cm3/min
- Temperature range of 0-38°C
- USB-A, USB-C and Wi-Fi port (For connection with Windows 10 Tablet or PC)
- Refillable isopropyl alcohol cartridge for 6 continuous hours of operation
- Operation by AC current