Filters, Tubes, Cyclone and air sampler accessories

What are air sampler accessories and how are they used in sampling air quality?

Air sampler accessories are equipment used to collect air samples for analysis of air quality. These accessories include filters, tubes, and cyclones. Filters are used to remove particulate matter from the air and are often made of materials such as fiberglass, cellulose, or polytetrafluoroethylene (PTFE). Tubes are used to capture gases and vapors in the air, while cyclones are used to separate larger particles from the air stream. These accessories can be used with various air sampling instruments such as personal air samplers, stationary samplers, and handheld devices. They are commonly used in industrial hygiene, environmental monitoring, and occupational health applications to measure concentrations of airborne contaminants and to assess the level of exposure to harmful substances in the air.

How do filters work in air sampling and what are the different types of filters available?

Filters are essential components in air sampling that are used to capture and retain airborne particles, including dust, smoke, pollen, and other contaminants. They work by allowing air to pass through while trapping and holding particles that are larger than the filter’s pore size. There are different types of filters available for air sampling, including high-efficiency particulate air (HEPA) filters, glass fiber filters, and membrane filters. HEPA filters are effective at capturing particles larger than 0.3 microns, while glass fiber filters and membrane filters are commonly used to capture smaller particles. Some filters are also designed to capture specific types of contaminants, such as activated carbon filters for organic vapors and acid-treated filters for acidic gases.

What are tubes used for in air quality monitoring and how do they differ from filters?

Tubes are used in air quality monitoring to collect and analyze specific gases or vapors. Unlike filters, which collect particulate matter, tubes are designed to capture and concentrate specific gases or vapors onto a sorbent material. The sorbent material inside the tube reacts with and captures the target gas or vapor as air is drawn through the tube. The collected sample can then be analyzed in a laboratory to determine the concentration of the target gas or vapor. Tubes are typically used for short-term sampling, ranging from a few minutes to a few hours. In contrast, filters are designed to collect particulate matter, such as dust, pollen, and smoke, by physically trapping particles as air passes through the filter media. Filters can be used for both short-term and long-term sampling, ranging from a few hours to several days or weeks.

What is a cyclone in air sampling and how is it used to collect particulate matter?

A cyclone is a type of air sampler accessory used in air sampling to collect particulate matter, such as dust or aerosols. The cyclone operates by using centrifugal force to separate the particles from the air stream. As the air flows into the cyclone, it is forced to spin around in a circular motion. This spinning motion creates a centrifugal force that causes the larger particles to be thrown out of the air stream and collect on the walls of the cyclone while allowing the smaller particles to continue through and be collected on a filter. Cyclones come in different designs, with varying cut-off sizes, which allow the user to collect particles of different sizes.

What factors should be considered when selecting the appropriate filters, tubes, cyclones, and air sampler accessories for a specific air sampling application?

When selecting the appropriate filters, tubes, cyclones, and air sampler accessories for a specific air sampling application, several factors should be considered, including:

The target analyte: Different filters, tubes, and cyclones are optimized for different types and sizes of particles or gases, so it is important to select the appropriate product that can effectively capture the target analyte.

Sampling time: The sampling time will impact the selection of the appropriate accessory as some products can only be used for short-term sampling while others are designed for long-term sampling.

Flow rate: It is important to consider the flow rate required for the application and select the accessory that can operate within that range.

Compatibility: Ensure that the accessory is compatible with the air sampling device being used.

Sample volume: The required sample volume will determine the type and number of filters, tubes, or cyclones required.

Environment: The environment in which the sampling will be carried out will also affect the selection of the appropriate accessory. For example, if the environment is highly corrosive, then the selected accessory should be able to withstand such conditions.

Regulatory requirements: It is important to consider regulatory requirements and ensure that the selected accessory meets the necessary standards and regulations.

Overall, it is essential to carefully evaluate the specific air sampling application and choose the appropriate accessory to ensure accurate and reliable results.

How to choose the right Filters,Tubes, Cyclone and air sampler accessories for my workplace?

To choose the right Filters, Tubes, Cyclone and air sampler accessories for your workplace, you should consider the type of particles or contaminants present, the sampling method, and the specific requirements of your workplace. It’s important to consult with qualified professionals, such as air quality experts or equipment manufacturers, to ensure that the selected accessories meet the specific requirements of your workplace.

Inteccon offers a wide range of Filters, Tubes, Cyclone and air sampler accessories designed to meet the needs of different industries and applications. Their high-quality accessories can help ensure accurate and reliable air sampling and analysis for a safer and healthier workplace.

BGI By Mesa Labs Models

Mesa Labs is a company that uses technical expertise and innovation to enhance the quality of life for individuals worldwide. They specialize in products and services that directly impact critical environments, including medical breakthroughs, industrial operations, and product safety. Their mission is to improve the lives of patients, workers, and consumers through innovative solutions.

Quartz Fiber Filters for PM10 8″ x 10″

Quartz fiber filter for high volume samplers used in the collection of ambient particulate matter samples in fractions less than 10 microns (PM10) under US EPA methodologies.

PTFE filters for PM2.5 47 mm

This PTFE filter is designed for low volume samplers used in the collection of particulate matter samples in fractions less than 2.5 microns (PM2.5) in the environment. It is manufactured under US EPA methodologies to ensure accuracy and reliability in air quality monitoring.

Cyclone Triplex for PM1 / PM2.5 / PM4 to 3.5 / 1.5 / 1.05 LPM

This cyclone is designed for fractionating particulate material in fractions PM1, PM2.5, and PM4 at various volumetric flows, allowing for the evaluation of exposure to particulate material.

Cyclone BGI4L for PM4 at 2.2 LPM

This cyclone is designed to fractionate particulate material in the respirable fraction PM4, allowing for the evaluation of exposure to particulate material in occupational and environmental settings.

Cyclone SCC0.695 for PM0.8 to 2.21 LPM

The PM0.8 Cyclone is a device designed for the fractionation of particulate material in the respirable fraction PM0.8, allowing for the evaluation of exposure to fine particulate matter. This cyclone is commonly used in occupational and environmental health studies to measure the concentration of particles that are smaller than 0.8 microns, which have been linked to adverse health effects.

Cyclone GK2.05 for PM2.5 at 4 LPM

This cyclone is designed for the fractionation of particulate material in the PM2.5 size range, which is a critical metric in assessing air quality and potential health impacts. It is used in air monitoring and sampling applications to collect and analyze particulate matter. The cyclone separates and concentrates the PM2.5 fraction for accurate measurement and analysis, providing valuable information for environmental studies and regulatory compliance.

Cyclone Rascal GK4.162 for PM4 at 8.5 LPM

This cyclone is designed for the fractionation of particulate material in the respirable fraction PM4. It is commonly used for the evaluation of exposure to particulate material in occupational and environmental settings. By separating the PM4 fraction, this cyclone allows for a more accurate assessment of potential health risks associated with particulate matter in the air.

Cyclone GK2.69 for PM4 / PM10 at 4.2 / 1.6 LPM

The cyclone for fractionation of particulate material is designed to separate respirable particles with aerodynamic diameters of 4 micrometers or less (PM4) and 10 micrometers or less (PM10) for evaluation of exposure to particulate material. It is widely used in air quality monitoring, industrial hygiene, and other environmental applications. The cyclone operates by creating a high-velocity air stream that causes particles to impact and be trapped in a collection substrate, allowing for analysis and measurement of particulate matter concentrations.

Environmental Express Models

Environmental Express, an Antylia Scientific company, is a global leader in the development and manufacture of sample collection, preparation, single-use consumables, and analysis equipment for environmental water, air, and soil analysis. They are committed to providing high-quality products that improve the accuracy and repeatability of environmental analysis.

With a comprehensive range of products used in applications such as water and wastewater analysis, air quality analysis, and soil analysis, Environmental Express is ISO 9001:2015 Certified and is supported by a strong network of international dealers. They also include trusted ISO 9001 Certified brands such as Zefon International and Oakton Instruments in their product offerings.

Filter Suppport for 37 mm y 25 mm filters

Filter supports are essential accessories for air sampling applications that require the use of filters. These supports are designed to securely hold filters of different sizes and prevent them from cracking or breaking due to the suction of the sampling pump. This ensures that the sampling is accurate and reliable. Filter supports are available in different materials and sizes to fit various types of filters and sampling pumps. They are commonly used in applications such as air quality monitoring, industrial hygiene, and environmental analysis.

Cellulose Ester Filters (MCE) 37 mm and 25 mm

This product is a filter designed to retain particulate matter of varying diameters and pore sizes depending on the specific method used for occupational health and exposure evaluations. It is used to collect air samples for analysis in a variety of occupational settings. The filter is an essential component in air sampling equipment as it ensures that particulate matter is properly collected and prepared for analysis.

Cellulose Ester Filters (MCE) with 37 mm and 25 mm grid

This product is a filter designed to retain particulate matter of varying diameters and pore sizes depending on the specific method used for occupational health and exposure evaluations. It is used to collect air samples for analysis in a variety of occupational settings. The filter is an essential component in air sampling equipment as it ensures that particulate matter is properly collected and prepared for analysis.

37mm and 25mm PTFE filters

This product is a filter designed to capture particulate material of various diameters and pore sizes for occupational health and exposure evaluation. The filter’s selection depends on the specific method used for evaluation. These filters are commonly used in air quality monitoring and can help identify potential health hazards in the workplace.

PCTE fiber filters 37 mm and 25 mm

This product is a filter used for the retention of particulate material in various occupational health and exposure evaluations. The filter is available in different pore sizes and diameters to suit different methods and sampling requirements. It is designed to efficiently capture particulate matter for accurate analysis and assessment of occupational hazards.

37 mm and 25 mm Micro Quartz Filters

This product is a filter designed to capture and retain samples of particulate material in various diameters and pore sizes. It is suitable for use in evaluating occupational health and exposure in industrial and other work settings. The filter is available in different sizes and materials to meet specific sampling requirements and can be used with a variety of sampling equipment. Its high-quality design ensures accurate and reliable results in particulate matter analysis.

Filters of fiberglass 37 mm and 25 mm

This product is a filter designed to capture and retain samples of particulate matter of various diameters and pore sizes, depending on the method used to evaluate occupational health and exposure. These filters are commonly used in air quality testing and are essential for analyzing the composition of airborne particles in occupational environments. By capturing and retaining particles, these filters can help identify potential risks and hazards in the workplace, allowing for appropriate measures to be taken to protect workers’ health and safety.

25 mm cassettes for asbestos

These 25 mm cassettes are designed specifically for the measurement of asbestos at the occupational level. They can be used to assemble a train of sampling, allowing for the collection of samples for subsequent analysis. The cassettes are made with high-quality materials to ensure reliable results, and they are easy to use and transport. They are an essential tool for occupational health and safety professionals who need to monitor the presence of asbestos in the workplace.

37 mm solvent resistant cassettes

These 37 mm cassettes in styrene are designed in 2 or 3 pieces for easy assembly of a sampling train with 25 mm filters that are resistant to solvents. They provide a reliable and cost-effective solution for air sampling applications, particularly in occupational health and safety settings where exposure to hazardous airborne particles is a concern. The cassettes are compatible with a wide range of filters and can be easily disassembled for cleaning and reuse.

25 mm Cassettes in Styrene

These 25 mm cassettes are made of styrene and come in 2 or 3 pieces. They are designed for the assembly of a sampling train with 25 mm filters, commonly used in air sampling for particulate matter or gas analysis. The cassette is designed to securely hold the filter in place during sampling, allowing for accurate and reliable data collection.

37 mm Cassettes in Styrene

These 37 mm cassettes, available in 2 or 3 pieces, are used to assemble a sampling train with 25 mm filters. They are made of styrene and are resistant to solvents, making them suitable for use in various environmental and industrial applications. These cassettes are designed to be easy to use and provide reliable results in the collection of air samples for analysis.

37 mm cassettes without static conductivity

The 37 mm cassettes in styrene of 2 or 3 pieces are designed for the assembly of sampling trains with 25 mm filters. These cassettes are specially designed to prevent static conductivity, ensuring that the samples are not affected by static charge during collection. They are suitable for a range of environmental and occupational health applications, including the collection of particulate matter and other airborne contaminants.

37 mm solvent resistant cassettes

These 37 mm cassettes are made of styrene and come in 2 or 3 pieces. They are designed for assembling a sampling train with 25 mm filters that can resist solvents, making them suitable for use in industrial or laboratory settings where solvents are present.

Pipes for collection of gases and vapors

These tubes are designed for the accurate sampling of various gases and vapors. They are available in different materials such as Anasorb, and with different stages to ensure accurate results. The tubes are used in conjunction with air sampling pumps and provide a convenient and reliable method for measuring air quality.

Cyclone Dorr Oliver Nylon 10 mm for NIOSH 600, 7500, 7501, 7601, 7602

This cyclone is designed for fractionation of particulate material in respirable fraction required for evaluating exposure methods such as NIOSH 600, 7500, and other similar methods. It separates and collects particles of specific sizes according to their aerodynamic properties, enabling accurate and reliable sampling and analysis of airborne particulate matter. This cyclone is an essential tool for ensuring workplace safety and compliance with regulatory standards.